Upfitter Interface Module® 32 bit

Download

Upfitter Interface Module® 64 bit

Download

The Upfitter Interface Module® Programming Utility is used to program: UIM301-B, UIM501-B, B-UIM502-B, UIM515-B, UIM601-B, UIM701-B, UIM750-B, UIM752-A

There should be two files: UIM Programming Utility.exe and rxtxSerial.dll.
Ensure that the proper driver is installed for the USB to Serial download cable. This driver can be found here
Double click the UIM Programming Utility. Call InterMotive if you have questions or issues.

Police Interface Module Programmming Utility (PIM)

Download

This is where you download The Police Interface Module Programming Utility and it is used to program the PIM501

There should be two files: PIM Programming Utility.exe and rxtxSerial.dll. All files must be in the same directory to operate correctly
Ensure that the proper driver is installed for the USB to Serial download cable. This driver can be found here
Double click the PIM Programming Utility to start this application.
Call InterMotive if you have questions or issues.




Interceptor Switch Module Programming utility (ISM)

Download

This is where you download the Interceptor Switch Module Programming Utility which is used to program theISM500/501/502

There should be two files: ISM Programming Utility.exe and rxtxSerial.dll. All files must be in the same directory to operate correctly
Ensure that the proper driver is installed for the USB to Serial download cable. This driver can be found here
Double click the ISM Programming Utility to start this application.
Call InterMotive if you have questions or issues




Black Out Module Programming Utility (BOM)

Download

The Black Out Module which is part of the Interceptor Switch Module Programming Utility and this is used to program the BOM501

There should be two files: BOM Programming Utility.exe and rxtxSerial.dll. All files must be in the same directory to operate correctly
Ensure that the proper driver is installed for the USB to Serial download cable. This driver can be found here
Double click the ISM Programming Utility
Call InterMotive if you have questions or issues

Download the EcoLock Programming Utility (ECL)

Download

The Interceptor Switch Module Programming Utility is used to program the ECL554

There should be two files: ECL554 Programming Utility.exe and rxtxSerial.dll. All files must be in the same directory to operate correctly
Ensure that the proper driver is installed for the USB to Serial download cable. This driver can be found here
Double click the ECL554 Programming Utility to start this application.
Call InterMotive if you have questions or issues

InterMotive Download Manager (IDM)

Download

The InterMotive Download Manager is used to download new firmware or configurations. It is the easiest way to stay up to date.

Double click the InterMotive Programming Utility to start this application.
Call InterMotive if you have questions or issues

PRPC Download Manager (PRPC)

Download

The PRPC Download Manager is used to program PRPC products.

Double click the FLEXTech Programming Utility to start the application
Call InterMotive if you have questions or issues.

Survelliance Mode Module Programming Utility(SMM)

Download

The SMM Prorgramming Utlity is used to program the following products: SMM501

Double click the Surveillance Mode Programming Utility to start this application
Call InterMotive if you have questions or issues.

EcoStar Configuration

Establishing Eco-Star Laptop Communication:
This requires the use of InterMotive’s Download Cable, part# s-h37a1 (not part of ECO501 kit). You will be required to download and install the proper USB driver the first time you use this cable. All driver files are located
here

Find the correct drivers for your PC and follow the steps to download the latest version (located under the “Driver Version” heading). If unsure about the installation process, contact InterMotive for further assistance. Plug one end of the cable into your PC’s USB port, and with the vehicles key off, plug the other end into the Eco-Star module’s COM port.

Open the Microsoft communication application HyperTerminal. This program can be found under: Start All Programs | Accessories | Communications | HyperTerminal.

You will be prompted to give this connection setup a name. We suggest something meaningful such as “EcoStar Config”, which you may reuse in the future. The next window will prompt you to select the “COM port” to use for communicating with the module. Even though this download cable plugs into a USB port, it is treated like a serial COM port by HyperTerminal. Typically, the highest numbered COM port will be the InterMotive Communication cable.

Note:The COM port number can be confirmed in Windows XP by right-clicking on ‘My Computer’ and selecting ‘Properties.’ From this window select the ‘Hardware’ tab and click on ‘Device Manager.’ In the Device Manager window, expand the ‘Ports’ menu and the download cable connection will be displayed as ‘USB Serial Port.’

Turn the vehicle key to the ON position. The Eco-Star module should wakeup and text should display on the open HyperTerminal window. If nothing appears, unplug the 6 pin Data Link connector going into the Eco-Star module, wait several seconds and plug the connector back in. If still nothing appears, go to File | New Connection and try re-configuring the HyperTerminal as described above. If unsuccessful, contact InterMotive for further assistance.Once communication is established, type in the words “config” (followed by the enter key) and the configuration options that are described in Table 3 will appear. All options in the configuration menu come with descriptions that explain what the parameter is currently set to and how to update them. If you do not have HyperTeminal Installed on your computer, please download TeraTerm here

UIM4 64 bit

Download

UIM4 32 bit

Download

The UIM4 Programming Utility is used to program: A-UIM4-506A, B-UIM4-506-A, A-UIM4-751-A, A-UIM4-654-A

Click here for instructions on installing the InterMotive UIM4 GUI.

Download the "UIM4_v1.4_64.zip" before you try the "UIM4_v1.4_32.zip."

Call InterMotive if you have questions or issues.

Intermotive

InterMotive, Inc. is a leading designer and manufacturer of electronic control systems for the work truck, transit, emergency response, RV, and personal-use markets. Most of our products communicate with the chassis via the CAN Bus. Most of our products are plug and play. Intermotive is ISO 9001 certified by the International Standards Organization to assure our customers that all of our products follow our strict Quality Operating System. Our Corporate office is located in Auburn, California, with a satellite office in Elkhart, Indiana.

Copyright 2017 Intermotive Inc. | All of our products are proudly manufactured in the United States of America | 12840 Earhart Ave. | Auburn, CA 95602 | 800-969-6080 | 530-823-1048 | Fax: 530-823-1516